Note: this tool do not accept return for refund, just accept one year warrantry for repair, please know this.
Autohex II HW4 and the essential features needed to program BMW keys for E and F series, solving all cases including all keys lost.
Suitable for: BMW Locksmith Technician who is looking to have a startup solution for BMW keys programming (with HexTag for free)
Top Reasons to Get Autohex II BMW Lite Locksmith with HW4:
Read old ISN in BMW E series for following Ecus:D62M57A0, D62M57B0, D60PSA0, D50M57A0, D50M57E1, D60M47A0, D60M57A0, MEV9N46L, ME9N45, ME9N62, ME9E65_6, N73_L0, N73_R0, ME9N62_2, MSV70, MS450DS0, N62_TUE, N62_TUE2.
Read Long ISN (SK) in BMW E series from following Ecus: MSV80, MSD80, MSD81, MSD85, MSD85Y, MSS60, MEVD176K, ME17N45, MED17_2, MED17_2N, MEV17_2, MEV17N46, MEVD174K, MEVD174KW, MV1722, MVD1722, MEVD172, MEVD1724, MEVD1725, MEVD172Y, MEVD17KW, D70N47A0, D70N47B0, D71N47A0, D71N47B0, D71N47C0, D71N47D0, D72N47A0, D72N47B0, D73N47A0, D73N57A0, D73N57B0, D73N57C0, D73N57D0
Read Long ISN (SK) in BMW F series from following Ecus: MEVD172Y, MEVD172, MEVD1724, MEVD1725, N63TU_L0, N63TU_R0, S63TU_L0, S63TU_R0
Read long ISN (SK) in BMW E and F series on Bench using Factory Mode. No need to open the DME/DDE (Only Autohex II can do this function)
CAS1, CAS2, CAS3 and CAS3+ read only ISN and SK
Key Programming For E and F series (CAS1, CAS2, CAS3, CAS3+, CAS4 ,CAS4+, FEM, BDC)
Do diagnose and service functions from Autohex II (Read and erase fault codes, data stream values, activations, reset adaptation,...)
Use BMW ISTA-D on Autohex II WVCI (BMW ISTA-D Driver)
Unlock secrity of BDC and FEM to able to: Change BDC and FEM VIN, Change BDC and FEM ISN, Mileage Reset for BDC and FEM, and making a key for BDC and FEM.
Read ISN of MSD85, MSD87, MSV90 in F series.
Ecu Cloning/Tuning for a wide range of brands. This function is free for 90 days (Check Supported Ecu List).
Read and write CAS 1,2,3,4 EEPROM and FLASH 100% safely using HexTag tool.
Read and write other modules from BMW,Mercedes, Audi, and others BDM protocol by HexTag tool.
Modify KOMBI Mileage by HexTag tool.
What you miss in this Kit:
BMW E Series, F Series and G Series online Ecu Programming and Manual coding (can be ordered later)
Modify ISN/SK in DME, DDE and CAS by OBD (can be ordered later)
Reset EGS 6HP/8HP EWS (can be ordered later)
Ecu Coding, and Vehicle Order managing (can be ordered later)
What you get:
Autohex II Hardware WVCI HW 4
The powerful HexTag BDM and Key programmer.
BMW Software Lite Locksmith License
Key Programming License
BMW ISTA/D driver to run dealer software
1 year technical support
1 year hardware warranty
What is the annual fees for Autohex II BMW Lite Locksmith with HW4?
1. The annual fees for Autohex II BMW Lite Locksmith with HW4 is USD 350.00 after the 1 year free subscription.
2. The Ecu cloning function in Hextag is 90 days free trial, after 90 days, if you still want to use this function,you need pay USD1000 for ecu cloning license.
And the annual fee for ecu clong feature is USD350. If you do not need this function, no fee is needed.