Yanhua Mini ACDP BMW CAS1-CAS4+/FEM/BDC/ISN Package No need soldering Work with PC/ Mobile Device
This kit includes the following:
- Yanhua Mini ACDP BMW CAS1-CAS4+/FEM/BDC/ISN Package
- EEPROM function+ CAS1-CAS3+ CAS4+ FEM/BDC+ OBD ISN read
- Cas1-Cas4 newly add data repair function. This will help cas module replacement which caused by eeprom data lost or cas module broken.
- No Need Soldering
- ACDP Programmer Basic Module – This module is a necessary basic configuration for other modules
- Supports 93 /24/ 25 / 35/ 95 Series EEPROM in-circuit programming
- (ICP) and on adapter board programming (OBP)
- Parts of Freescale / NEC MCU in circuit programming（ICP)
- Module #1 – CAS Module
- Supports CAS1 – CAS3+ IMMO key programming by OBD or ICP mode, Mileage reset, Read/Write EEPROM and FLASH data.
- Supports CAS4/CAS4+ IMMO key programming in-circuit programming (ICP), Mileage reset, Read/Write EEPROM and FLASH data.
- Module #2 – FEM/BDC Module
- Supports FEM/BDC IMMO key programming by ICP or OBP mode, Mileage reset, Recover/Backup data.
- Module #3 – ISN Module
- Read/write N20/N55/N13 ISN code via OBD.
- Read/write MSV80/MSD85 ISN code without opening DME shell.
- Read/write other DME ISN code by opening DME shell.
Features of Yanhua Mini ACDP on IMMO/Mileage Programming
No need to remove chip
For Android Phone,
please Scan the QR code to Install ACDP App
Yanhua Mini ACDP Key Programmer Modules Introduction
Customer Feedback on Yanhua Mini ACDP
|Support 93 /24/ 25 / 35/ 95 Series EEPROM in circuit programming (ICP) and on adapter board programming (OBP), and parts of Freescale / NEC MCU in circuit programming（ICP）. This module is a necessary basic configuration for other modules.
||(1) Support CAS1 – CAS3+ IMMO key programming by OBD or ICP mode, Mileage reset, Read/Write EEPROM and FLASH data.
(2) Support CAS4/CAS4+ IMMO key programming in circuit programming (ICP), Mileage reset, Read/Write EEPROM and FLASH data.
||Support FEM/BDC IMMO key programming by ICP or OBP mode, Mileage reset, Recover/Backup data.
||Read/write N20/N55/N13 ISN code via OBD.
Read/write MSV80/MSD85 ISN code without opening DME shell.
Read/write other DME ISN code by opening DME shell.
||Support erase/adjust mileage of 080DOWQ/T,160DOWQ/T EEPROM.
||Fujitsu CPU MB91F Module
||Support Fujitsu CPU MB91F (Honda Fit, KIA K3/K5, Sonata 9, etc.) Mileage adjustment.
||Support parts of VDO mileage adjustment of VW MQB platform via OBD,and Passat MMC (NEC D70F3525 + 95320) instrument
adjustment after years 2015 by ICP mode.
||Refresh BMW key
||Refresh BMW E chassis/F chassis key to make BMW keys can be used repeatedly.
(FRM Footwell module)
|Read and write BMW FRM module (FRM Footwell module) 0L15Y chip EEPROM/FLASH data.
Read and write 3M25J chip EEPROM/D-FLASH/P-FLASH data.
||Jaguar and Land Rover KVM Module
||Supporting adding key and all key lost for new Jaguar and Land Rover after year 2015
||Porsche Key Programming from 2010-2018 Add Key & All Key Lost
BMW gearbox EGS ISN clearance
1.nice tool again. this stray with all the activations is also worth more (BMW CAS1, CAS2, CAS3, CAS3 +, CAS4, CAS4 +, FEM, BDC 8pin IC chip read and write)
2.currently i'm only doing bmw with cas 1-3 and ews my lonsdor can do cas 1-3 it will only add keys to 3+ and up. I just don’t like to solder so I figured this tool would simplify things a bit and make it faster
3.I got it since a week and i am excited
M35080 Programming needs some improvements, there are some bugs (tested on 4 dashs, and its better to desolder)
Serial EEP 24XX, 25XX, 93XX, 95XX works like a charm (but tested on only 3 Eeps)
Tried several CAS4 to read with out any problems, Mileage reset works too
CAS3 tested only 1 but read without problem
On a nother group they reported to create successfully keys on FEM/BDC and CAS4
4.I just get it.
Reading eeprom cas4 and make a key for f11 so far done.
Cant say much more.
cas4 reading eprom compared with vvdi reading and its matching 100%
5.All 35080/160 are possible, like all other programmer can do also.
ACDP is also working with smartphone tethering so a router is not a must.
Didn’t test if it works offline,
Fem key making and mileage reset is confirmed by other users in WhatsApp group,
I can confirm mileage reset cas3/3+/4, key making cas3/3+, key 868mhz refresh
and frm programming
But sometimes it’s tricky to place the probes correctly, it’s faster to use other programmer
until you have figured out how to place probes correctly
6.I have it and have had it for more than 3 months now.
It works perfect on all CAS types and for AKL but for FEM and BDC it still has a long way to go.
Its also compitable via bluetooth so not only wifi is needed.
Its a great and small tool, easy to use, compared to VVDI, R70, Upa and etc.
7.for FEM/BDC with isn or key make, you have to use module 2. For 35160/35080 BMW dashboard mileage correction, you need to get module 4.
8.Tested the Mini ACDP here with 4 CAS3 and one CAS4+ without any problems. For the first CAS3 I needed more than 5 minutes to place the pins correctly but after some experiences I needed only 30 seconds for everything. Important is that you use the small screw tools to clean the contacts.
For FEM/BDC I use my Autohex II and for eeproms my other stuff like R27, Codiprog USB mk2 and Orange5.
9.something good to share: For FEM/BDC, 3 months ago, it needed FEM electric bridges to complete. Now update Mini ACDP to the newest version, it won’t need the electric bridges any more, and it is easy to use.
10.BMW 5 series CAS4 2015 OK.
Any questions, Please contact me freely.
Live Support: Chat with us online
Yanhua ACDP add keys for BMW4+ via OBD
Yanhua ACDP Mini do CAS4 Key Programming
Yanhua ACDP Mini do CAS3+ Key Programming
Yanhua Mini ACDP read BMW CAS4 eeprom
Yanhua Mini ACDP adds BMW FEM key via phone no soldering
How to authorize Yanhua ACDP by yourself?
1. When you get ACDP, you should download the APP and bond ACDP.
For iOS Phone,
please enter "Mini ACDP“ in App Store to download the APP.
For PC Version,
please download it from official website
For Android Phone,
please Scan the QR code to Install ACDP App
2. After the ACDP bonded, it shows the device does not obtain the authorization of the relevant function, as shown:
Here is the stpes to get the authorization
1.Please make sure the IOS version is 1.8.4 or above，and Android version is 3.0.92 or above.
2.There is a paster with authorization code on the module box，take off the green security seal and clean up the QR code.
3.Make sure the ACDP has bounded successfully，and click “me”：
4. Click “module list”：
5. Click “ADD”
6. Click “Scan QR Code” to start scanning the QR code on the paster
or type the authorization card（Capital letters only）
7. Check the authorization card number and click "Submit" after confirmed.
8. When the prompt comes with authorization success，click “OK”
9. When the prompt comes with refreshing authorization info success，click “OK”
10. If you want more module authorization info，please click “ADD”for more.
11. If you change another phone or PC，after the ACDP bounded，please click “Refresh”to download your authorization info.